Better photos with your phone

A plain guide to your phone camera's Pro mode.

20 min read#photography#phone#camera

You've probably been here. You stand at a viewpoint, the view is beautiful, and the photo looks nothing like it. Later someone posts a photo from the same spot and it's stunning. Maybe you opened Pro mode once, saw ISO 2500, 1/30s and WB 4700K, and closed it again.

So let's go back to that viewpoint. It's early evening, the sun is getting low, and you have your phone out. We'll take the photo again, one decision at a time.

This post explains that screen one setting at a time, in plain words. It also has the small tricks photographers usually figure out only after years of shooting. You don't have to read all of it. Look at the pictures, read the bold bits, and tap Like thisTap any of these for the technical bit, explained simply. Tap outside to close it. when you want to know more.

if you only remember five things

  1. Wipe your lens before every photo.
  2. Tap the subject, then slide the brightness down until the sky has colour.
  3. Look at where the light comes from before you look at the subject.
  4. Check the background and the four edges.
  5. Take a few, then move your feet and take a few more.

The Pro screen, decoded#

Open the camera, swipe across to Pro (it's under More on some phones), and you get a screen full of numbers. It looks like a lot, but every one of them has a simple job.

This is the Pro mode on a Samsung phone. Other phones and camera apps use the same names, just in different places.

A phone camera's Pro screen with each setting numbered 12M RAW ↺ ISO 250 1/30s −0.3 AF WB 4700K UW W T ST 1 2 3 4 5 6 7 8 9 10 11 12
Yellow means you set it by hand. A small “A” next to a value means the phone picks it.
  1. Flash. Keep it off. Phone flash is flat and harsh. A window or a lamp to one side looks far better.
  2. 12M, 24M, 50M. The photo's size in megapixels.MegapixelsHow many million dots make up the photo. Big phone sensors often merge four tiny pixels into one bigger one, which catches more light. That's why 12M often looks cleaner than 50M indoors and at night. Use 12M most of the time. See megapixels for when the bigger sizes help.
  3. Metering (the circle icon). How the phone decides what “bright enough” means.MeteringThe phone measures the light and aims for an average brightness. Matrix looks at the whole frame, centre-weighted cares most about the middle, and spot measures only one small point. See metering below.
  4. The striped circle. Switches between Off, Zebra pattern and False colour. Both show which parts of the scene are too bright, before you take the photo. See bright spots.
  5. RAW. Saves an extra file with much more detail for editing.RAWA RAW file (DNG on most phones) keeps far more of what the sensor saw than a JPEG does. It looks flat at first and the files are big, but you can rescue far more of the sky and shadows. A JPEG is the finished photo with much of that extra data thrown away. Turn it on when you plan to edit. Expert RAW can save RAW, JPEG or both.
  6. Histogram. A small graph of the photo's brightness. It's more honest than your screen. See the histogram.
  7. ISO. How much the phone boosts the light. Low is clean, high is grainy. See ISO.
  8. Shutter speed (S). How long the photo takes. Fast freezes, slow blurs. See shutter speed.
  9. EV. Brighter or darker, in one slider. See EV.
  10. AF / MF. Auto or manual focus. See focus.
  11. WB. White balance, in Kelvin. It fixes the colour of the light. See white balance.
  12. Lenses. UW is ultra-wide, W is the main camera, and T and ST zoom further. W is the best one in low light.

The ↺ button puts everything back to auto. In Expert RAW you also get F 1.7, the lens opening. It's greyed out because most phone lenses can't change it. The flask icon opens Labs, with extras like astrophotography and multiple exposures. The sliders icon in the corner of the viewfinder holds two ready-made presets, Night sky and Night long exposure. They're good starting settings for night shots. Put the phone on a tripod or a wall first.

Notice how EV is greyed out in Expert RAW when ISO and shutter are both yellow? Once you set both by hand, there's nothing left for the phone to adjust, so EV stops working. Set one of them back to auto and EV comes back.

You'll set most of those once and forget about them. The ones you'll keep touching are ISO, shutter speed and EV, and all three do the same job: they decide how bright the photo comes out.

The only trade-off you need#

Most phones can't change their lens opening. So they have two ways to make a photo brighter, and each one costs you something.

Slower shutter and higher ISO both brighten the photo. One adds blur, the other adds grain. SHUTTER 1/1000 s frozen, darker 1 s brighter, blurry ISO 50 clean, darker brighter, grainy 3200
Brighter always costs you something: blur or grain.

Pick which cost you can live with. A sharp photo with some grain beats a clean, blurry one. So raise the ISO before you let the shutter get too slow to hold.

Shutter speed#

Back at the viewpoint, the light is starting to fade. The phone needs more light for each photo, and the first thing it does is leave the shutter open longer.

Fast freezes. Slow blurs.Shutter speedHow long the sensor collects light for one photo. 1/1000 is a thousandth of a second, fast enough to freeze a splash. 1 means a whole second, so anything that moves will smear, and so will your hands.

A moving ball at three shutter speeds: frozen, slightly blurred and a long streak 1/1000 s1/60 s1/4 s frozena little blura streak
  • 1/1000 sKids, pets, sport, birds, splashes.
  • 1/250 sPeople walking. Most street photos.
  • 1/30 sThe slowest most people can hold still. Lean on something.
  • 1 s and slowerSilky water and light trails. Needs a tripod or a steady rock.

ISO#

There's a limit to that. Below about 1/30 s your hands start to blur the photo, so the phone stops slowing down and turns up the ISO instead.

Low is clean. High is grainy.ISOHow much the phone amplifies the light it caught. It's like turning up the volume on a quiet recording. You hear it better, but the hiss comes up too. That hiss is the grain in dark photos. Keep it as low as the light allows. In daylight that's the lowest number your phone offers.

The same scene at ISO 100, 800 and 3200, getting grainier ISO 100ISO 800ISO 3200 cleansome graingrainy, soft
Why does a high ISO also look soft?

The phone cleans up the grain before it saves the photo. That cleaning smooths away fine detail too, like hair and leaves. So a high-ISO photo is often both grainy and smudgy. Night mode avoids this by taking many short photos and merging them.

EV, the one to use most#

You don't have to balance those two yourself, though. Leave both on auto and use EV. It's one slider, and the phone works out the rest.

EV makes the photo brighter or darker. The phone still picks ISO and shutter for you.EV (exposure value)Each step of 1 doubles or halves the light. +1 is twice as bright, −1 is half as bright. On a phone it's often the sun icon next to the focus box. In Pro mode it's the EV slider.

This is the setting that changes your photos the most. Bright white areas lose all detail and you can't get it back later. Dark areas usually still have detail you can bring out. So when the sky is bright, go darker until it has colour again.

The same landscape at EV −0.7, 0 and +1. At +1 the sky turns pure white. EV −0.7EV 0EV +1 sky keptphone's guesssky gone for good
You can brighten dark ground later. You can't bring back a white sky.

On any phone, without Pro mode: tap the subject, then drag the sun icon down. It's the same thing.

See the bright spots before you shoot#

Going darker until the sky has colour sounds easy. In practice, outdoors on a bright screen, it's hard to tell when the sky has gone. That's the job of the striped circle.

Turn on the zebra pattern and leave it on. It's the striped circle at the top of Pro mode. Your screen can't show you when part of the sky has turned pure white. Zebras can.Zebra patternMoving stripes drawn over every part of the scene that's so bright it's about to lose all detail. They only show on the screen, never in the photo. Video cameras have had them for decades.

The same sky three ways: as you see it, with zebra stripes over the bright sun and cloud, and as a false-colour brightness map OffZebraFalse colour what you seebright = stripesa brightness map
Stripes on the sky? Lower EV until they're gone, or nearly.
  • Zebra pattern draws stripes over anything about to turn pure white. Lower EV until the stripes leave the parts you care about. A few on the sun itself are fine.
  • False colour paints the whole scene by brightness, like a heat map. Dark areas turn cool colours and bright areas warm ones, so you can check a face and the sky at the same time. Each app uses its own colour scale.
  • Off is what you're used to. It's also why so many skies come out white.

White balance#

With the sky back, the next question is whether its colour is right. The sunset in front of you is orange, and your phone may not want it to be.

WB fixes the colour of the light. Auto is fine most of the time.Kelvin (K)A scale for the colour of light. A candle is about 1900K, an indoor bulb about 3000K, midday sun about 5500K and open shade 7000K or more. You tell the phone which light you're under, and it cancels that colour out.

Here's the part that confuses everyone. The number is the light you're telling the phone you're under, so it works backwards. A lower number makes the photo bluer. A higher number makes it warmer.

Light gets bluer as Kelvin goes up, but setting a higher Kelvin makes the photo warmer The light itself candle 1900Kbulb 3000Ksun 5500Kshade 7500K Your photo, if you set WB to… 3000K: bluer5500K: as it was7500K: warmer
  • Daylight, about 5500KSunsets. Auto tries to “fix” the orange and you lose the colour.
  • About 3200KIndoors under warm bulbs, if skin looks orange.
  • About 6500KCloudy days and shade, when everything looks a bit blue.
  • AutoEverything else. Shoot RAW and you can change it later for free.

Focus#

Brightness and colour are sorted. Now make sure the right thing is sharp.

AF focuses for you. Tap where you want it sharp. On most phones, a long press locks focus and brightness, so they don't change when you move the phone a little.

MF is manual focus. Use it when the phone keeps focusing on the wrong thing, like a fence in front of an animal, or a window instead of the view behind it. Many phones then outline the sharp edges in colour as you turn the dial. That's called focus peaking.

Metering#

Sometimes the phone gets the brightness wrong before you've touched anything. Your friend stands against the bright sky and comes out as a dark shape, or a face in a dark room comes out glowing. Both come down to metering.

Most of the time, leave it on the default. It decides what the phone treats as “normal” brightness.

Three metering modes: matrix measures the whole frame, centre-weighted the middle, spot one point MatrixCentre-weightedSpot most scenesmiddle subjectlit face, stage

Spot is the one to know. A singer under a spotlight or a face lit by a window in a dark room will come out too bright with matrix. Spot measures only a small area in the middle, so put the face there and it comes out right.

Megapixels#

One last setting before you shoot. The bigger sizes at the top of the screen look tempting, but they're not always better.

More megapixels only help when there's lots of light and nothing moves. The rest of the time, 12M gives you a cleaner photo.

  • 12MAlmost everything: night, indoors, people, pets, anything moving. It's the cleanest and fastest, and its HDR works best.a few MB per photo
  • 24MA safe step up in daylight. A bit more detail for landscapes and trips, with little cost.about twice the size
  • 50MBright daylight only. Landscapes, buildings and anything you'll crop or print big. Hold still while it saves.15–25 MB per photo
  • 100M, 200MFull sun, a still subject and a steady hand, for huge prints or a heavy crop. Slow to take, and it gets noisy as soon as the light drops.very large files
Cropping the middle of a 50M photo gives a 12M photo at 2× zoom. Cropping a 200M photo gives 12M at 4×. the full photo 12M from 50M = 2× 4× from 200M a crop of a big photo is still a full 12M photo
This is how many phones zoom to 2× without a separate lens.
How big does a photo need to be?

Less than you'd think. A 12M photo is 4000 × 3000 pixels. A phone feed shows it about 1080 pixels wide, and a sharp A4 print needs about 3500. So 12M is plenty unless you crop hard or print poster-sized. The bigger modes earn their keep when you want to crop in later, because a crop of a 50M photo is still a full 12M photo.

Settings for common scenes#

That's every setting on the screen. Nobody thinks through all of them for every photo. Most of the time you start from a combination that suits the scene and adjust from there. Here are good ones for the scenes you'll meet most.

Copy these, then adjust with EV. “Auto” means leave the phone in charge of that one.

  • Portrait by a windowW or T lens ISO auto 1/125 s EV −0.3 WB autoTap the eye. Turn the face towards the window.
  • Kids, pets, sport1/1000 s ISO autoTake several shots in a row and keep the sharpest.
  • Landscape in daylightISO lowest S auto EV −0.3 to −0.7 RAW onKeep the sky blue, lift the land later.
  • SunsetEV −0.7 to −1 WB 5500KDarker keeps the colour. Fixed WB stops the phone undoing the orange.
  • Food and indoorswindow light EV +0.3 WB autoLight from the side or behind. Shoot from above or at 45°.
  • Silky water, light trailstripod ISO lowest 1 to 10 s self-timerThe timer stops your finger shaking the phone. At night, Expert RAW's Night long exposure preset is a good place to start.Too bright in daylight?A long shutter lets in so much light that daytime photos turn white. Photographers use an ND filter for this: dark glass, like sunglasses for the lens, that cuts the light so the shutter can stay open longer.
  • City at nightNight mode or ISO auto 1/15 s EV −0.3Brace the phone on something. Keep the lights from turning white.
  • Starstripod Expert RAW Labs: astrophotoFar from city lights, on a night with no moon. Expert RAW's Night sky preset is a good start.

Light first, subject second#

Get the settings right and the photo will be sharp and well exposed. Whether it's beautiful depends mostly on the light, and you control that by choosing when you go and where you stand. It's also why that evening at the viewpoint is a good time to be there.

Before you look at the subject, look at where the light comes from. It decides more than any setting.

A ball lit from the front looks flat, from the side looks round, from behind glows at the edge From the frontFrom the sideFrom behind flatshape, textureglow, dark face
  • The first and last hour of sun give soft, warm light from the side. Most of the photos you admire were taken then.
  • The half hour after sunset is blue and even. It's the best time for cities, when the lights come on but the sky still has colour.
  • Cloudy days are great for portraits, forests and food. Keep the white sky out of the frame.
  • Harsh midday sun is hard on faces. Move people into shade, like the edge of a building's shadow.
  • The eye goes to the brightest spot first. If that isn't your subject, move or wait.

Bad weather makes good photos. Fog, rain and the light right after a storm are when everyone else puts their phone away.

Find the photo before you raise the phone#

The light is good. Now, what are you actually taking a photo of? This is where most phone photos go wrong. They show everything in front of you, so nothing stands out.

Say in one sentence what the photo is about. Her laugh. The fog in the valley. How tiny the house looks under the mountain. Anything that doesn't help that sentence is a distraction.

A pole sticks out of a person's head. One step left moves it beside them. A pole out of the headOne step to the left
Check what's behind the subject before you check the subject.
  • Check the four edges. A bright spot, half a person or a branch poking in pulls the eye out of the photo.
  • Get closer. Most photos have too much in them. Fill the frame, or leave lots of empty space on purpose.
  • Change your height. Almost every photo is taken at standing eye level. Crouch, or hold the phone low near the ground, and the same scene looks new.
  • Put something in front. A rock, a flower or a railing close to the lens adds depth to a landscape.
  • Keep the horizon straight. Turn on the grid and the level in the camera settings.
  • Wait for the moment. Frame a pool of light or a doorway and wait for someone to walk into it.

Where to put the subject#

Once you know what the photo is about, decide where it sits in the frame. These mistakes are easy to miss in the moment and obvious later.

Four mistakes and their fixes. A person facing the edge of the frame, and the same person with room to look into. The horizon running through someone's neck, and the horizon below their shoulders. A head and feet touching the edges, and a little room around them. A dark-haired person lost against dark trees, and the same person standing against the sky. ✗ Facing the edge✓ Room to look into ✗ Horizon at the neck✓ Below the shoulders ✗ Touching the edges✓ A little room ✗ Lost in the trees✓ Against the sky
Most fixes are one step, a crouch or a small turn away.
  • Put the eyes a third of the way down. It works for almost any portrait, close or wide.
  • Let a line lead in. A path, a river or a railing that runs towards the subject takes the eye there. A line that runs out of a corner takes it away.
  • Small in a big view is fine. A tiny person in a huge landscape looks deliberate on a third line. In the middle, they just look too far away.
What about the rule of thirds?

It's a good starting point. Put the subject or the horizon on one of the grid lines instead of the middle. But a centred subject works well for symmetry, reflections and portraits that stare straight at you. Use the grid to try options, then pick what looks best.

Pick the right lens#

You know what goes in the frame. The last choice is which lens to use, and it changes more than how much fits.

How far away you stand changes how faces and backgrounds look.

Ultra-wide from close stretches the face and shrinks the mountain. Zoomed in from further away keeps the face natural and makes the mountain big. UW, closeT, a few steps back
Same person, same framing. Only the distance and the lens changed.
  • For faces, step back and zoom in. The ultra-wide up close stretches noses and foreheads. The 2× or 3× lens from a few steps back looks like the person does in real life.
  • To make a mountain look huge, zoom in from far away. It pulls the background closer behind your subject.
  • To make a room or a canyon feel huge, use the ultra-wide close to something. Watch the edges, which stretch.
  • At night, use W. It has the biggest sensor. The other lenses get noisy first, and the phone sometimes swaps in a crop of W anyway.
  • Zooming past the lens buttons is just cropping. Walk closer instead.

Things photographers learn late#

Everything so far you can learn in an afternoon. The rest usually takes years, because you only notice it after getting it wrong a few times.

Read the histogram, not the screen#

The first one goes back to that bright screen at the viewpoint.

Your screen lies. Outdoors at full brightness everything looks darker. In a dark room everything looks brighter. The histogram doesn't change with the screen.HistogramA graph of how many pixels are dark, middle or bright, from left to right. It's a count, not a picture. A tall wall right at the edge means part of the photo is pure black or pure white.

Three histograms: piled on the left is too dark, spread out is fine, a wall on the right means the sky is blown out Too darkFineSky blown out try EV +0.3leave ittry EV −0.7

A good histogram doesn't have to be a hill in the middle. Snow sits on the right and a night street sits on the left. Just watch for walls at the very edges.

The small stuff#

The next few are small, but they add up.

  • Wipe the lens. A fingerprint makes everything soft and hazy and turns street lights into smears. It's the most common reason phone photos look bad.
  • Shoot between the poses. The laugh after “say cheese” is usually the keeper. Keep shooting after people relax.
  • Give people something to do. “Look at the window” or “walk towards me” works better than “smile”.
  • Don't crop at joints. Cutting off at the wrist, knee or ankle looks odd. Crop between them.
  • Use a second phone as a light. Put a friend's torch to one side of a face, through a sheet of paper to soften it. It beats the flash every time.
  • Leave distance behind people. The further away the background is, the blurrier it gets and the more they stand out.
  • Check focus right away. Zoom in on the photo before you leave. Soft photos look fine on a small screen.

The habits#

And then there are the habits. These take months to pay off.

  • Take a lot, keep very few. Working photographers might keep one shot in twenty. Show only your best.
  • Look again a week later. Right after a trip you remember how it felt. A week later you see what's actually in the photo.
  • Study photos you love. Ask where the light comes from, what was left out, and why that moment.
  • Go back to the same place in different light and weather. You learn more about light from one place than from many.
  • Back up. Keep three copies, on two different kinds of storage, with one somewhere else. Phones get lost.
  • Print your favourites. A print shows you things a screen hides.

Before you press the shutter#

The sun is almost down now. Before you press the shutter, run through this once.

Got the photo? Part 2 shows how to edit it in Snapseed or Lightroom.