Editing photos in Snapseed and Lightroom

Make a flat photo look good in Snapseed or Lightroom.

You took a photo you like, but it looks a bit flat next to the ones you admire. The difference is mostly editing, and that's easier to learn than you'd think. This post walks through one edit from start to finish, in the order that works, with the tools in your app. A good edit should feel like the place did. Nobody should notice it was edited.

If you read part 1, you already have a photo for this. It's the one from the viewpoint, taken in the early evening with the sun getting low. On the phone it looked close to how you remember it. On a bigger screen the sky is a little grey and the hills are darker than they were. We'll fix it here, one step at a time. Any photo of yours will work too.

Show the steps for

Written for Snapseed 4. Older versions call Adjust “Tune Image”, and may not have Dehaze, Color HSL or Color Grade.

Written for Lightroom on a phone or tablet. The desktop app has the same sliders in a different layout.

Before you start#

Open the photo, but leave the sliders alone for now. A few things come first.

  • Have a goal. Say in one sentence what the photo should feel like: warm and quiet, bright and clean, dark and moody. Every change should move towards it.
  • Set up your screen. Turn off auto-brightness and night mode (Night Shift, True Tone, eye comfort), and set the brightness to about two-thirds. A warm or changing screen makes you correct colours that aren't there.
  • Keep the original. Snapseed keeps every step in the photo's edit history, so you can go back and change one.Lightroom never changes the original. Save alternatives with Versions instead of editing over the one you like.
  • Compare often. Press and hold the photo to see the original.

The order that works#

For the viewpoint photo, that sentence might be warm and quiet, the way the evening felt. With that in your head, here is the order to work in.

  1. Crop and straighten: decide what's in the photo.
  2. Set the light: make the subject readable.
  3. Fix white balance: remove colour casts.
  4. Haze and depth: decide how much atmosphere to keep.
  5. Tune colour: calm the loud colours, help the quiet ones.
  6. Grade the look: give it a mood.
  7. Guide the eye: local light and darks.
  8. Detail and noise: clean, believable texture.
  9. Check and export: a file that looks right everywhere.

Later steps change earlier ones. Contrast changes how colour looks, and a grade can make a photo darker, so go back when you need to.

What looks wrong?#

Some days you don't want the whole list. You look at a photo and one thing bothers you.

Pick the closest one for the first thing to try.

Everything is too dark

Raise Adjust › BrightnessLight › Exposure until the subject looks right, then lower Highlights if the sky goes white. A shaded forest doesn't need to look sunny. Step 2

The sky is fine but the person is dark

Raise Shadows and lower Highlights, then brighten just the person with Selective or Brush › Dodge & BurnMasking › Select Subject. Brightening the whole photo turns the sky white. Step 7

It looks flat and grey

Set the ends first: in Curves, drag the bottom-left point a little to the right and the top-right point a little to the leftraise Whites until just before the brightest part loses detail, and lower Blacks until the darkest part is truly dark. Then add a little Contrast. Adding saturation to a flat photo just gives you colourful grey. Step 2

It's too blue, yellow or green

Use the white balance picker on something that should be grey or white, then fine-tune Temperature (blue to yellow) and Tint (green to magenta). Keep some warmth if it was a warm light. Step 3

The colours look fake

Find the one colour that's too loud, usually grass, sky or skin, and lower that colour's saturation in Color HSLColor › Mix. Leave the others alone. Step 5

Skin looks orange, red or green

Check the white balance first. Then lower the orange channel's saturation, or raise its luminance for lighter skin. A strong grade in the highlights can tint faces too. Step 5

The distance is hazy

Decide if the haze is the mood. If you want to see through it, add a little Dehaze and apply it only to the distant part. Recheck brightness and colour after. Step 4

It looks soft

Zoom in on an edge. Slight softness takes a little Details › Structure and SharpeningEffects › Texture and Detail › Sharpening. Missed focus and motion blur can't be fixed; pick a sharper frame. Step 8

The sky or shadows are grainy

Undo some of the shadow lift and Structure. Both make noise easier to see. Snapseed has little noise control, so it's easier to avoid noise than to remove it.Raise Detail › Noise Reduction until the sky is calm, and Color Noise Reduction for coloured speckles. Stop before skin looks waxy. Step 8

The subject gets lost

Brighten the subject a little and darken what competes with it: a bright corner, a white car, a busy edge. A tighter crop often does the same job. Step 7

I want it to have a mood or a film look

Finish the corrections first, then grade: a curve, a colour in the shadows, another in the highlights, and fewer colours overall. Step 6

It looks over-edited

Compare with the original and lower the strongest change, usually saturation, Structure or Clarity, Dehaze or a vignette. Several sliders pushed the same way add up. Step 9

It looks different after posting

Export a full-size, high-quality JPEG, open the exported file and compare. Apps recompress photos and some screens show more colour than others. Step 9

Try it on a photo#

Before you edit your own photo in the app, it helps to see what each slider does. This one runs in the page, on a sample photo.

Move one slider far, so you can see what it does. Then bring it back to a small amount. Press and hold the photo to see the original.

The sliders behave like the real ones, but the numbers won't match the app exactly. The little graph in the corner is the histogram. It turns red at an edge when part of the photo goes pure black or pure white.

original
try a look
Light
Colour
Color HSLMix
Grade

Shadow colourShadows hue

Highlight colourHighlights hue

1. Crop and straighten#

Back to the viewpoint photo. The first step doesn't touch the colours at all. It starts at the edges of the frame, where a bit of railing pokes in and the horizon tips slightly to one side.

Decide what the photo is about, then remove what doesn't help it.

Tools: Crop, Rotate and Perspective (one tool, Crop and rotate, in some versions)Crop (Aspect, Straighten) and its Geometry tab

  1. Crop a little at a time. Trim bright fragments, cut-off people and clutter from the edges first. Try a generous crop and a tight one, and keep the one that still shows where you were.
  2. Straighten with something you know is level or vertical: a sea horizon, a doorframe, the edge of a building. Hills and paths slope on their own, so leave those. Crop › Geometry › Level levels it for you.
  3. Fix leaning buildings gently with PerspectiveCrop › Geometry › Vertical. Strong corrections stretch people near the edges.
  4. Pick the shape for where it's going: 4:5 or 3:4 for a phone feed, 9:16 for stories, 3:2 to print, 16:9 for a screen.
  5. Zoom out. If the subject is still clear at thumbnail size, the crop works.

Leave space in the direction someone looks or moves, and crop between joints, never at a wrist, knee or ankle.

Two crops. Cutting a person off at the knees, and cutting at mid-thigh instead. A sea horizon that slopes, and the same horizon level. ✗ Cut at the knees✓ Cut mid-thigh ✗ Horizon tilts✓ Level
Crop between joints, not on them. Level the horizon by the sea or a building.
Common mistakes
  • Straightening a hill until it's flat. Only correct a tilt you can prove with a horizon or a vertical.
  • Cropping so tight the place disappears. A small person in a big landscape is often the point.
  • Cropping away too many pixels. A heavy crop looks soft when printed or shown large. Check it at the size you'll use.

2. Set the light#

Now the frame is clean and level. The next thing you notice is the light. The sky is bright and the hills in front have gone dark.

Make the important detail readable while keeping the character of the light.

Tools: Adjust (Brightness, Contrast, Highlights, Shadows, Ambiance) and CurvesLight (Exposure, Contrast, Highlights, Shadows, Whites, Blacks) and Light › Curve

  1. Set the overall brightness for the subject with BrightnessExposure. Look at the face or the main subject while you do it. Ignore the brightest cloud.
  2. Bring back the brights. Lower Highlights until the sky or a white shirt has detail again. If it stays white, that detail wasn't saved when you took the photo.
  3. Open the darks. Raise Shadows until the detail that matters shows. Leave some real darkness. It gives the photo depth.
  4. Set the end points. In Curves, drag the bottom-left point slightly right for true blacks and the top-right point slightly left for clean whites.Raise Whites until just before the brightest part loses detail, and lower Blacks until the darkest part is truly dark. This one step makes most flat photos look finished.
  5. Add contrast last, a little at a time, or with a gentle S-shaped curve: pull the lower part of the curve down slightly and push the upper part up slightly.

Turn on the histogramHistogramA graph that counts how many pixels are dark, middle or bright, from left to right. It doesn't change with your screen brightness, so it's more honest than your eyes. (tap the photo with two fingers). A pile against the right edge means something has turned pure white, and against the left, pure black. It doesn't have to be a hill in the middle: snow belongs on the right, a night scene on the left.

A sky that has turned pure white with no clouds left, and the same sky with its clouds and blue brought back. ✗ Sky burnt to white✓ Clouds kept
Lower Highlights until the clouds come back. If they don't, they weren't captured.
Common mistakes
  • Brightening everything to rescue one dark face. Brighten the face on its own in step 7.
  • Pulling Highlights down until white clouds turn grey. Clouds are meant to be bright. Back off a little.
  • Lifting every shadow. It flattens the photo into the "HDR" look. Choose which shadows need detail.
  • Pushing AmbianceShadows and Highlights to the limit. Extreme values put grey halos along edges like ridgelines and rooftops.

3. Fix white balance#

Opening the shadows brings out their colour too. On this photo the valley in shade now looks a little blue, and the clouds a little green.

Correct the casts you didn't want and keep the light that was really there.

Tools: White Balance (Temperature, Tint, auto and a colour picker)Color › White Balance (presets, Temp, Tint and the eyedropper)

  1. Name the cast: too blue, too yellow, too green or too pink. Dull colour is a different problem, for step 5.
  2. Use the picker on something that should be neutral and still has detail: a grey wall, a white shirt in shade, the shadow side of a cloud. Skip pure white areas. They have no colour left to read.
  3. Fine-tune Temperature (blue to yellow), then Tint (green to magenta).Two directionsLight varies in two ways. Sun, shade and bulbs move it between blue and yellow. Fluorescent tubes, leaves and some phone processing push it towards green or pink. Each slider fixes one of those. They fix different problems.
  4. Check skin and things you know, then give back some of the mood. A sunset should stay warm and blue hour should stay blue.

Under mixed light, like a warm lamp beside a cool window, balance for the light on the face and let the rest stay warm or cool. That's how the room looked.

A sunset whose orange sky has been corrected to plain grey, and the same sunset with its warm colour kept. ✗ Sunset made grey✓ Warmth kept
Correct the colour you didn't want. A sunset's colour is the reason for the photo.
Common mistakes
  • Removing all the warmth from golden hour. Correct only the excess.
  • Fixing a green cast with Temperature. Green is Tint.
  • Trusting one "white" object. Shirts, walls and paper are often tinted. Check two or three things.
  • Big corrections on a JPEG. JPEG colour breaks down quickly. If white balance is often wrong, shoot RAW, where it costs nothing to change.

4. Haze and depth#

With the colour right, look at the far hills. They sit in a soft haze that catches the evening light.

Haze can hide what you came to see, or it can be the whole mood. Decide which before you touch it.

Tools: DehazeEffects › Dehaze, with Masking to limit it

  1. Decide what the photo needs: clearer mountains, more mist, or a balance.
  2. Add a little Dehaze and compare. Watch the gaps between the ridges as well as the foreground.
  3. Apply it only to the distance. Open the edit history, pick the Dehaze step and paint its mask over the far part of the scene.Add a Linear Gradient mask over the far hills and use Dehaze inside it.
  4. Recheck brightness and colour. Dehaze also darkens and adds colour. Skies can turn heavy and blues too strong.

Far things should stay lighter and softer than near things. That's how your eye reads distance. Make every ridge equally dark and the mountains look flat.

Three ridges one behind the other. On the left every ridge is the same dark colour and they look flat. On the right the far ridges are lighter and the scene has depth. ✗ Every ridge as dark✓ Lighter with distance
Use Dehaze on the distance, but keep far things lighter than near ones.

Negative Dehaze adds haze. A little, on a mask, softens a background or adds a glow to backlit scenes.

Common mistakes
  • Removing all the mist because it looks like a flaw. It often explains the weather and the distance.
  • Sharpening a hazy mountain. Sharpening doesn't see through haze.
  • Fixing Dehaze side effects with more sliders. Lower the Dehaze instead. That usually fixes the dark sky, the strong colour and the noise all at once.

5. Tune colour#

Once the haze is settled, the colours are easier to judge. The grass in front is a loud green, while the sky is fine as it is.

Make the colours get along. Stronger colour rarely looks better.

Tools: Adjust › Saturation and Color HSLColor (Vibrance, Saturation and Mix)

  1. Check light and white balance are done. A dark or tinted photo looks dull for reasons saturation can't fix.
  2. Adjust all colours a little. Keep Saturation between about −10 and +15.Use Vibrance rather than Saturation: it boosts the muted colours more and is gentler on skin.
  3. Then fix one colour at a time, changing hue, saturation or luminance:HSLHue is which colour it is, so you can move green towards yellow. Saturation is how strong it is. Luminance is how light or dark it is. The tool changes these for one colour range and leaves the rest alone.
    • Neon grass: lower Green and Yellow saturation, and move the Green hue a little towards yellow for a natural olive.
    • A deeper sky: lower Blue luminance a little. Watch for noise and stripes in the gradient.
    • Better skin: raise Orange luminance a little to brighten it, and lower Orange saturation if it looks sunburnt.
  4. Watch the neighbours. Changing yellow also moves skin, sand and wood.Use the targeted tool in Mix: tap it, then drag up or down on the colour in the photo, and Lightroom picks the channels for you.

Professional photos usually have fewer, quieter colours. Pick the one or two colours that carry the photo and calm the rest down.

Common mistakes
  • Orange faces after fixing foliage. Yellow and orange changes reach skin too. Undo them a little and check the face.
  • A sky like a painted wall. Ease off blue saturation and darkening, and keep the gradient towards the horizon.
  • Saturation creep. Your eyes get used to strong colour within minutes. Look away, then compare with the original.

6. Grade the look#

At this point the viewpoint photo is correct. It looks like the place, but it doesn't feel like that evening yet.

The first five steps make a photo look right. Grading is where you give it a mood, and it's usually the difference between a fixed photo and one that looks finished.

Grade only after steps 1–5. A grade on top of a colour cast makes the cast worse, and a grade on a badly exposed photo just tints the problem.

What a grade is made of#

  1. A tone curve.Tone curveA line from dark (bottom left) to bright (top right). Push a part of the line up and those tones get brighter. Pull it down and they get darker. An S shape makes darks darker and brights brighter, which is extra contrast. A gentle S adds punch. Lifting the black point (raising the curve's bottom-left end) gives a soft, matte, filmic look. Lowering the white point softens highlights like a print.
  2. Split toning.Split toningAdding one colour only to the dark parts and another only to the bright parts. Film and cinema use it a lot. It's why so many films have bluish shadows and warm skin. One colour in the shadows and another in the highlights. The classic is cool shadows (teal or blue) with warm highlights (orange or yellow), because that's how sunlit skin looks against shade.
  3. A narrow palette. Pull the colours together: greens towards olive, blues towards teal, everything a little less saturated except the colour that matters.
  4. Texture. A little grain makes a grade feel like film and hides banding in smooth skies.

In Snapseed

  • Curves work in every version. Use the RGB curve for the S shape and the lifted black point. Then switch to the Blue curve: raise its lower part for blue shadows and lower its upper part for yellow highlights. The Red curve does the same for red and cyan. Small moves; the curve should barely bend.
  • Color Grade (in the Refine tools in newer versions) is a quicker way to tint shadows and highlights. The same rules apply: low strength, and check skin.
  • Film (Grainy Film in older versions) adds grain. Keep it faint.
  • Save it as a Look from the Looks tab, or copy the edit stack and paste it onto the other photos, so a whole trip shares one grade.

In Lightroom

  • Start with a profile. Profiles sets how colour and tone are read before any slider. For RAW photos, Adobe Color is a good everyday start, Adobe Neutral is flatter, and Adobe Portrait is gentler on skin. The Film-Inspired, Vintage and Modern groups are ready-made looks to start from.
  • Light › Curve for the S shape and the lifted black point. The Red, Green and Blue curves tint shadows and highlights the same way as a split tone.
  • Color › Grading has a colour wheel each for Shadows, Midtones, Highlights and Global. Drag the pointer to pick a colour, or open the sliders to set exact Hue and Saturation values like the recipes below. Blending sets how much the ranges overlap and Balance shifts the split towards the shadows or the highlights.
  • Effects › Grain and Effects › Vignette finish the look.
  • Save it as a preset with Presets › Options › Create Preset, or copy the edits and paste them onto the rest of the set.

Recipes to start from#

These are starting points. Fix each photo's exposure and white balance first. The playground above has its own versions of three of them, made for its photo: Teal and orange, Clean and bright, and Black and white.

Look What to do
Warm film Curves RGB: lift the black point slightly. Blue curve: shadows up a touch, highlights down a touch. Adjust: Saturation −10, Warmth +10. Color HSL: greens less saturated. Film: faint grain.
Teal and orange Blue curve: shadows up, highlights down. Red curve: shadows down a touch, highlights up a touch. Color HSL: blues towards cyan, oranges kept.
Moody forest Adjust: Brightness −10, Highlights −30. Color HSL: greens darker, less saturated and towards yellow. Vignette: outer brightness down a little.
Clean and bright Adjust: Brightness +10, Shadows +20, Contrast −10, Saturation +5. No tint.
Black and white Black & White with the Orange or Red filter to darken a blue sky. Then a gentle S in Curves.
Look Starting values
Warm film Curve: lift the black point slightly. Grading: Shadows hue 210, saturation 10; Highlights hue 45, saturation 15. Mix: Green hue −15, saturation −20. Grain 15–25.
Teal and orange Grading: Shadows hue 200, saturation 15; Highlights hue 40, saturation 15; Balance −10. Mix: Blue hue −20, Aqua saturation −10.
Moody forest Exposure −0.3, Highlights −30. Mix: Green hue −10, saturation −25, luminance −20. Grading: Shadows hue 190, saturation 10. Vignette −15.
Clean and bright Exposure +0.3, Shadows +20, Contrast −10, Whites +10, Vibrance +10. No colour grade.
Black and white Color › B&W, then in Mix: Blue −30 darkens the sky, Orange +15 brightens skin. A gentle S curve.

Grading like a pro#

  • When it looks right, take a third off. Your eyes adjust to a grade in minutes, and a grade that looks strong now looks heavy tomorrow.
  • Check skin after every change. Skin should stay orange-ish. A green or pink face is the first sign a grade has gone too far.
  • Keep whites nearly white. A tint in the highlights shows straight away on snow, clouds and white clothes. Use less highlight saturation than shadow saturation, or move Balance towards the shadows.
  • Use opposite colours. Shadows and highlights from opposite sides of the colour wheel (teal and orange, blue and yellow) look deliberate. Two colours that sit next to each other just look like a colour cast.
  • Grade the whole set. Use the same look on every photo from a day, then adjust exposure and white balance on each one so they match.
  • Treat presets as a starting point. Someone else's preset was made for their light. After applying one, redo exposure and white balance, and lower its strength.
  • Edit next to a reference. Put a photo whose colour you love beside yours and compare how dark the blacks are, what colour the shadows are and how saturated the skin is.

7. Guide the eye#

With the grade on, step back and notice where your eye goes. On this photo it goes to the bright sky in the top corner before it finds the hills.

Different parts of a photo need different help. Small local changes lead the eye where you want it.

Tools: Selective, Brush (Dodge & Burn, Exposure, Temperature, Saturation), Vignette and HealingMasking (Select Subject, Select Sky, Brush, Linear and Radial Gradient), Remove and Effects › Vignette

  1. Find where your eye lands first. If it isn't the subject, something there is brighter, sharper or more colourful.
  2. Lighten the subject a little. Place a Selective point on it and raise Brightness, or paint with Brush › Dodge & Burn at a low strength.Select Subject, then raise Exposure by about 0.2 to 0.4.
  3. Darken what competes: bright corners, a white sign, a busy edge.
  4. Calm a bright sky. Place a Selective point on the sky and lower Brightness, then check the edge where the sky meets trees or buildings.Select Sky, then lower Exposure or Highlights.
  5. Remove small distractions with HealingRemove: a wire, a bin, a spot on the lens. Zoom in afterwards. Repeated patterns give a repair away.
  6. Add a vignette only if it helps, and keep it faint.

Lighten a little where you want people to look, darken a little where you don't. This is called dodging and burning, and it's behind most photos that look professional. Nobody should be able to see where you did it.

Common mistakes
  • A glowing outline around a person. The mask is too hard or the change too strong. Lower it and soften the edge.
  • A face much brighter than the body. It looks spotlit. Make it easy to see, and stop there.
  • A sky mask that spills into the trees. Inspect the mask and paint the spill out.
  • Many patches of edits. Turn them off one at a time and keep only the ones that clearly help.

8. Detail and noise#

The edit is nearly done. Before you save it, zoom in once.

Aim for clean, believable detail at the size people will actually see.

Tools: Details (Structure, Sharpening)Detail (Sharpening, Noise Reduction, Color Noise Reduction) and Effects (Texture, Clarity)

  1. Zoom in to 100% on an edge, like an eyelash, a ridgeline or a strap, and on a smooth area like the sky or a shadow.
  2. Deal with noise first. Snapseed has little noise control, so prevent it: lift the shadows less and keep Structure low on night and indoor photos.Raise Noise Reduction until the sky is calm, and Color Noise Reduction for coloured speckles. Stop before skin and leaves turn to paint.
  3. Add texture where it helps. A little Structure on rock, bark or fabric.Texture is the gentle one, safe on most things. Clarity is stronger. Keep it under about +20, or use a negative value to soften skin.
  4. Sharpen last, and less than you think. Raise Sharpening's Masking so only the edges get sharpened. Skin and sky stay smooth.
  5. Zoom back out and judge at normal size.

Phones already sharpen every JPEG and HEIF. Many need no extra sharpening at all.

A dark hill against the sky, close up. On the left a bright outline runs along the edge from too much sharpening. On the right the edge is clean. ✗ Halos along edges✓ Clean edge
Zoom in where a dark edge meets the sky. A bright outline means too much sharpening, or too much Structure or Clarity.
Common mistakes
  • Crunchy grass and bright outlines on ridges. Too much sharpening or Structure. Lower them one at a time to find which.
  • Waxy skin. Too much noise reduction. A little grain looks better than plastic.
  • Structure or Clarity on faces. It adds years. Keep it off skin.
  • Sharpening a blurred face. Sharpening can't bring back focus. Pick a sharper frame.

9. Check and export#

That's the last change to the photo itself. What's left is checking it and getting it out of the app without losing anything.

Look at the whole photo once more, then save a file that looks right wherever it goes.

Tools: the Export tab (Save, Save a copy, Export)Share › Export as (file type, dimensions, quality)

  1. Take a five-minute break, then look again. Strong colour and contrast are easier to see with fresh eyes.
  2. Compare with the original and lower the change that draws attention to itself.
  3. Zoom in on faces, edges and the sky for halos, banding and patchy masks.
  4. Export a full-size, high-quality JPEG. Use Export › Export. It saves a new JPEG with the edits baked in, so every app shows them. Save and Save a copy store the edits in a way some apps ignore.In Export as, choose JPG, Largest Available Dimensions and quality 90–100%. Make smaller copies for sharing when you need them.
  5. For an Instagram feed, 1080 × 1350 (4:5) or 1080 × 1440 (3:4) is the size it shows, so it compresses the photo less.
  6. Open the exported file in your gallery or the app you're posting to and check it there.

Always edit from the original. If you edit an exported JPEG and save it again, it loses a bit more quality every time.

Before you share#

Go through this list once before you post the viewpoint photo, or any other.

That's one photo finished. The steps stay the same for every photo after it. What gets better with time is knowing how far to go, and these habits help with that.

Habits that take years#

  • Small amounts win. Most sliders in a professional edit sit between −20 and +20. If a slider is near its end, there's usually a better tool for the job.
  • Edit a set in one sitting. Photos from one day should look like they belong together. Grade the first, copy it to the rest, then fix each one's exposure and white balance.
  • Walk away. Your eyes adjust to colour casts and strong saturation in minutes. Come back and the green cast is obvious.
  • Flip it. Mirroring the photo for a moment in the crop tool lets you see the composition fresh. Flip it back before you export.
  • Check it in black and white. Drop Saturation to −100 for a moment. If the subject isn't the brightest or most contrasty part, colour won't save it.
  • Make presets from your own best edits. Downloaded presets were made for someone else's photos. Your style is just the choices you keep repeating.
  • Re-edit an old photo once a year. You'll see how much your taste has changed, and what you used to overdo.

Habits come from doing the same small things often. Here's a week of short exercises to start them.

A week of practice#

Use your own photos, 15 minutes a day, and keep the versions so you can compare.

  1. Crop. Three photos, two crops each. Say what each crop removed and what it cost.
  2. Light. One backlit photo, one evenly lit. Change only brightness, highlights and shadows. Leave the colour alone.
  3. White balance. A photo in shade, one on an overcast day and a sunset. Push Temperature and Tint far both ways to learn them, then make a small, honest correction.
  4. Colour. A photo with greenery and a person. Calm the greens and check the skin.
  5. Grade. One photo, three grades: warm, cool and black and white. Keep the one that fits the photo best.
  6. Dodge and burn. One local change that moves the eye to the subject. Lower it until you can barely see it.
  7. A set. Five photos from one day with the same look, adjusted until they match.

After each one, finish this sentence: this change helped because…

Words you'll meet#

The glossary

Exposure, brightness: the overall lightness of the photo.

Highlights, shadows: the brighter and darker tones. They pick areas by brightness, so a white shirt counts as a highlight just like the sky.

Whites, blacks: the very ends of the tonal range. Setting them gives a photo its full range from dark to light.

Contrast: the separation between light and dark tones.

Clipping: tones pushed to pure white or pure black, with no detail left.

Histogram: a graph of the photo's tones, dark on the left and bright on the right.

White balance: the colour of the light, set with Temperature (blue to yellow) and Tint (green to magenta).

Hue, saturation, luminance (HSL): a colour's family, its strength and its brightness.

Vibrance: saturation that boosts muted colours more than strong ones.

Colour grading: creative colour added after correction, usually different in the shadows and the highlights.

Split toning: one colour in the shadows and another in the highlights.

Tone curve: a line mapping input tones to output tones. Bend it to change contrast, fade the blacks or tint a channel.

Dehaze: reduces (or adds) the look of haze.

Structure, texture, clarity: contrast in fine detail, small to medium in size.

Sharpening: stronger contrast at edges, so they look crisper.

Noise: grain or coloured speckles, worst in dark areas and smooth skies.

Mask, selection: the area a local edit applies to.

Dodge and burn: lightening and darkening parts of a photo to guide the eye.

Halo: a bright or dark outline along an edge, a sign of a heavy edit.

RAW: a file that keeps far more of the sensor's data than a JPEG, so there's more room for editing.

sRGB: the colour space most screens and apps expect, so it's the safe choice for sharing.

Further reading#